Wiring products
· Bus holders SHPP, SHPR, SHK and bus braces RSHT.
TU 34-43-11025-86
Bus holders and bus braces are destined to fasten buses on insulators, increase bus rigidity, create gap that improves conditions of cooling.
Climatic execution U3.
Bus holders SHPP (for flat buses)
Bus holders SHK (for box-type buses)
To order bus holders you must specify:
-bus section
-number of buses in the packet
-type of the base insulator
Bus brace RSHT
Version 1
· Type of brace is specified in requirements specification. Necessity of supplementary data is estimated during order arrangement. Documentation may be presented in arbitrary form.
Brace type |
version |
Size,mm |
I, mm |
L, mm |
Mass, max kg |
|
Width |
Thickness |
|||||
RSHT 60x10-1 U3 |
1 |
60 |
10 |
90 |
96.4 |
0.13 |
RSHT 60x10-2 U3 |
2 |
90 |
100.0 |
0.14 |
||
RSHT 80x10-1 U3 |
1 |
80 |
110 |
116.4 |
0.15 |
|
RSHT 80x10-2 U3 |
2 |
110 |
120.0 |
0.15 |
||
RSHT 100x10-1 U3 |
1 |
100 |
130 |
136.4 |
0.16 |
|
RSHT 100x10-2 U3 |
2 |
130 |
140.0 |
0.16 |
||
RSHT 120x10-1 U3 |
1 |
120 |
150 |
156.4 |
0.17 |
|
RSHT 120x10-1 U3 |
2 |
150 |
160.0 |
0.17 |
Bus compensators KSHA, KSHM, KSHAK.
ТU 34-43-11023-86
Bus compensators are destined to compensate thermal expansion of copper and aluminium buses, aluminium box-section buses as well.
Climatic execution U2, T2 according to GOST 15150-69.
You should specify type of connection (bolted or welded one) to order compensators.
Transition plates AP
ТU 34-43-11023-86
Transition plates are destined to connect aluminium buses to the leads of electrical apparatus and machines (copper flat or tubular).
Climatic execution U2, T2 according to GOST 15150-69.
Clamp boxes KZ
Clamp boxes of KZ type are intended for connection of branch wires, cores of control cables during assembly of lighting networks and secondary circuit facilities; rated voltage is up to 660V (a.c.), frequency 50 Hz and current 16A.
The bodies of clamp boxes (version 1) are made of light gage steel, grade 08kp according to GOST 16523-70; also they are equipped with grounding clips.
The bodies of clamp boxes (version 2) are made of polypropylene or another equivalent material.
Clamp boxes are equipped with glands, made of polypropylene or another plastic mixture, to seal cables and wires.
Box type |
All-Russian production code |
Number of clamps |
Mass max, kg |
KZ 12-1 UHL4 |
34 6474 2831 |
12 |
1.78 |
KZ 12-2 UHL4 |
34 6474 2841 |
12 |
1.14 |
KZ 16-1 UHL4 |
34 6474 2851 |
16 |
1.84 |
KZ 16-2 UHL4 |
34 6474 2861 |
16 |
1.2 |
KZ 24-1 UHL4 |
34 6474 2871 |
24 |
2.4 |
KZ 32-1 UHL4 |
34 6474 2881 |
32 |
2.48 |